Spin Out Mortise Cylinder Screwdriver by Keedex | Video

Spin Out Mortise Cylinder Screwdriver by Keedex

Constantly stripping screws on mortise cylinders? Use this tool to help. The Spin Out Mortise Cylinder Screwdriver by Keedex is great for those hard to remove tail pieces as it features a screwdriver with an oversized handle for extra torque. With four sizes of interchangeable screwdriver bits, 2 Slotted and 2 Phillips it will sure make rekeying mortise cylinders easier and faster.

The Spin Out Mortise Cylinder Screwdriver by Keedex comes with a base and a pad to protect the mortise cylinder from any damage; you just have to remove the adhesive paper at the back and place it on the base.

Getting screws out of some cylinders can be really tough, so if you need to take off a bunch of Philips or flat head mortise cylinders you can strip them out without problem with the Spin Out Mortise Cylinder Screwdriver by Keedex. Notice that it also comes with two mounting holes, to make it easy for you to mount it on a work bench.

Once you’ve placed the head in the turning knob, insert it in the upper hole on the base. Put the cylinder below and make sure that the screw you want to remove is aligned to the head of the screwdriver. You’ll be able to put a lot of pressure immediately and remove the screw easily.

It’s a great tool to have! Check it out here - Spin Out Mortise Cylinder Screwdriver by Keedex

Added to Cart