Which Lock Lubricant Is the Best

Which Lock Lubricant Is the Best

If there was a simple answer to the question, which lock lubricant is best, the answer would be yes. It is impossible to say that there is a lock lubricant that is the best in all situations. Of course, some may say so, but certainly this isn’t the case. Is graphite the best option in some situations? Absolutely! Is a synthetic, aerosol lubricant better in other situations? Yes. Each situation renders a different lubricant the best locksmith tool for the job.

Graphite Lock Lubricant

Graphite, aside from more general automotive oils, may just be the first in lock lubricants. Locksmiths have been utilizing this resource for many years and it has proved itself over and over through years of use. Graphite is useful because of the way the molecules are layered, with weak bonding between each layer, and offer lubrication at temperatures much higher than liquid or oil based lubricants. Another great benefit is the fact that particles do not attract to graphite the way they might to an oil based lubricant, therefore not attracting unwanted particles into the lock.

Synthetic Aerosol Lock Lubricant

In more recent years, synthetic lock lubricant has circulated into use and has found a number of extremely useful applications. Corroded or dirty locks can be cleaned out using high pressure aerosol lubricant. This not only flushes out the lock, but also provides a lubricated surfaced deep into each pin chamber, top pins, and springs. Gaining entry through picking on these corroded locks could have previously been impossible without these products. In a similar way graphite resists high heat applications (although modern synthetics tolerate temperatures up to 450 F), synthetic aerosol lock lubricant also frees locks that are frozen in extreme cold.

locksaver synthetic lock lubricant

Synthetic Grease

There is something about the feel of a lock that has been recently assembled using grease. The smooth characteristics any customer is sure to enjoy. Grease, when properly applied, can create some of the finest operating lock parts. Despite the smooth operation, grease has some obvious drawbacks. Grease, in dirty environments, has a tendency to attract a lot of dust and grime from outside. Keys used in the lock that aren’t impeccably clean will leave contaminants within a lock.

Make a wise choice when applying lubricants. Each has its own benefits. Stock your truck or work shop with quality lubricant form CLKSupplies.com!

Added to Cart