Key Machines & Parts

3" Nylon Wheel Brush For Key Machine Soft-touch brush fits all machines equipped with wire brushes with a 1/2 Arbor Hole in the middle.  The part n...

3" Wire Wheel Brush For Key Machine 3" diameter with 1/2" arbor hole Wire Brush Works on the Following: Ilco Silca-040HDIlco Silca-044HDIlco Silc...

Keep your Black Widow key machine running no matter where the job takes you! This powerful 22,000mAh 12V portable battery provides reliable energy ...

Already own a jump-starter battery with a blue EC5-F connector? Take your Black Widow key machine’s portability to the next level with this essenti...

Keep your Black Widow key machine powered wherever the road takes you with the 12-volt Vehicle Power Adapter. Designed for ultimate convenience, th...

Expand your Black Widow key-cutting capabilities with the Commercial Keys Software Upgrade, designed for those who originally purchased the Black W...

Transform your Black Widow key cutting machine into a residential and commercial powerhouse with The Black Widow Deluxe Upgrade Kit. This kit is de...

Optimize your locksmithing workflow with the Black Widow Premium Android Tablet. This 8-inch powerhouse is the perfect companion for your Black Wid...

Unlock the full potential of your Black Widow key machine with the Single-Edge Commercial & Auto Jaw. Designed to pair seamlessly with the stan...

Cutter Nut for HPC Blitz Machines HPC Number: CM-1039MA Left Hand Nut for Cutter Shaft  Used on the HPC Blitz Code Machine    Works with the foll...

Framon 2 Vise For Automotive / I-Core  This vise will hold the wide, deeply milled blanks such as X160, X161, X176 and X184 that tend to tip in the...

Framon Compression Springs (Vise Springs) 5 Pk Fits the Following: Framon-1 Code Machine,Framon-2 Code MachineAvailability-7 days

Framon Depth & Space Manual Introducing the Ultimate Resource for Locksmiths: Framon Depth & Space Manual Unlock the full potential of your...

Framon Drive Belt for Code Machines Fits the Following: Framon-1 Code Machine,Framon-2 Code MachineAvailability-7 days

Framon Interchangeable Core Cutter FC9054 90 degree angle, .054″ flat Availability-3 days

The Framon KX-1 is capable of cutting various types of keys from different manufacturers. All you have to do is switch out the cams and, if necessa...

Framon Key Stop For Code Machines  Fits the Following: Framon-1 Code Machine,Framon-2 Code MachineAvailability-7 days

Framon Kwikset, Weiser, Weslock Cutter FC9090 90 degree angle, .090″ flat Availability-3 days

Framon Medeco Cutter FC8615 This is the Framon 2 Code machine Medeco Cutter.   Availability-3 days

Framon Schlage Cutter FC10031 100 degree angle, .031″ flat Availability-3 days

Framon Spacing Block Rack for Code Machines This rack holds six Framon spacing blocks securely. Blocks snap in and out of the rack in seconds.  I...

Framon Standard Cylinder Cutter FC9045 90 degree angle, .045″ flat Availability-3 days

Futura Engraving Kit (Includes Jaws, 1 Cutter) The engraving kit for the Futura Pro and Futura Pro One. Owners can further increase the capability ...

Futura Engraving Replacement Cutter (18DW) Ilco OEM Original Part Item Number: 18DW Part Number: D748741ZB, BC0930XXXX Works with the followin...

Futura Subscription One Year Tired of having to renew your FUTURA Software Subscription each year in order to keep up with new CARDS/Code series? N...

Futura Subscription 10 year Tired of having to renew your FUTURA Software Subscription each year in order to keep up with new CARDS/Code series? No...

Futura Subscription 3 Years Tired of having to renew your FUTURA Software Subscription each year in order to keep up with new CARDS/Code series? No...

Futura Subscription 5 Year Tired of having to renew your FUTURA Software Subscription each year in order to keep up with new CARDS/Code series? Now...

GM Z Keyway Adapter For Cutting B106, B111-PT Tired of having the Z Keyway keys slipping out of your jaws on your key machine?Put this adapter on y...

HPC 1200 Cutter Adjustment Wrench (WRENCH-1) Needed to replace or exchange cutter wheels on the 1200 HPC Models Works with the following: HPC-Trac...

HPC 1200 Shoulder Gauge Assembly (CMB-FG) This is the replacement Shoulder Gauge Assembly for: HPC-Trace A KeyHPC-1200CMBHPC-1200CMBXHPC-1233CMSB

HPC Calibration Kit For 1200CMB This easy to use tool kit is for use with all Blitz™ and Switch Blitz™ series key machines. It is designed to quick...

The Quick Nut twists on and off by hand eliminating the need for wrenches when changing cutters, making the process faster and easier. Works with t...

HPC Softie™ Brush (TYX-3) The HPC Softie™ brush is the only key machine brush made of Tylon-X. The carbide impregnated brush de-burrs faster, smoo...

An operators dream machine, the KD50C is superbly engineered with numerous features to deliver quick results with exceptional precision and accurac...